How to disassemble Lenovo legion Y530

If you want to disassemble the Lenovo legion Y530 due to any reason but do not know the process then you are at the right place. In this article, I am going to tell you “How to disassemble the Lenovo legion Y530.” Read this article from start to end to know further about it.

Lenovo legion Y530 Overview

Are you looking for a gaming laptop with a wonderful design and good performance but at an affordable price? Then, the Lenovo legion Y530 is the best option for you. It comes up with a smooth system that offers wonderful looks, a great range of USB ports, and the best graphic card. Its keyboard has a mushy keyboard and the best colors.

Lenovo legion Y530 is a good choice for gamers who want to get good gameplay. It is made up of plastic but it looks great. It has a matte-back interior with a black keyboard within cool and wonderful white backlights. The power button is fixed above the keyboard in front of Y530’s sturdy hinge.

How to disassemble Lenovo legion Y530

If you want to disassemble your Lenovo legion Y530 then you should follow the instructions mentioned here.

• First, you should gather all the important and needed tools. You will require a small screwdriver, a medium-sized flathead screwdriver, and a Phillips head screwdriver. You may also require a knife or a spudger.
• When you gather all the things or tools that are required to disassemble then you need to unscrew the screws that are located on the back of the laptop. Unscrew the two screws that are located near the hinges at the backside of the laptop. After removing the screws, open the laptop and eliminate the battery.
• After removing the battery, find the RAM modules and remove them by pressing down the tabs. Keep sure that in which slot each RAM module was in so, you can place them back correctly.
• At this time, you need to remove the four screws, which hold down the hard drive. After unscrewing the screws, you can remove the hard drive and can place it aside. Now, you need to remove the screws located near the optical drive. After removing the screws, keep them with care, so as not to lose them because you later need them to assemble all the parts. You should also know that all the screws are different so they need to fix at the exact place from where you remove them.
• After removing the optical drive, you can access the CMOS battery. Remove the battery and place it aside. Now, you need to remove the keyboard. Start removing the keyboard by removing the screws on the back of the laptop. After that, flip the laptop over and detach the bezel. After detaching the bezel, you need to see two screws that are holding the keyboard. After finding the screws, remove them and then raise the keyboard out of the laptop.
• After removing the keyboard by following the above instruction, you can easily access the touchpad. Now, you need to remove the touchpad. Remove the four screws on the back of the laptop and find two ribbon cables that are linking the touchpad to the motherboard. Slowly pull the cables and lift the touchpad out of the laptop.
• After removing the touchpad, you can see the cooling fan. If you want to remove the cooling fan, then you need to detach the fan power cable, which is linked to the motherboard. You can remove the fan by detaching the power cable from the motherboard.
• After removing the cooling fan, you can easily reach the heat sink. If you want to remove the heat sink then you should first find the two thermal pads on the sink. Smoothly unwrap these pads and remove the heat sink.
• After removing the heat sink, you can easily reach the processor. If you want to remove the processor then you need to find two notches on the processor. Line up them with two notches on the socket and smoothly remove the processor.
• After removing the processor, you can easily reach the motherboard. Therefore, you can remove the motherboard by removing the screws if you find any.

Lenovo Legion Y530 is the best gaming laptop that is built to last. However, you may need to disassemble it for replacing any component in your laptop. Therefore, if you do not want to take your laptop to a professional for replacing any component then you can disassemble it on your own by following the above process.

Systematic process of disassembling Lenovo legion Y530

If you want to know a systematic process to disassemble the Lenovo Legion Y530 then you should follow the step below:

Required Tools

• Tools for opening plastic
• Screwdriver

Detach the battery

Before starting to disassemble the Lenovo legion Y530, you need to ensure that you disconnect the battery because it can cause any electrical shock during the disassembling process.

Separate the Bottom Case

If you want to easily, access all the internal components of your laptop. First, you need to remove the bottom case. Start by finding the screws on the bottom of the laptop and remove the screws with a screwdriver. After that, lift the case by using the plastic opening tool.

Find the component you want to disassemble or replace

When you access the internal components, you need to find the component you want to disassemble or replace. This can be any internal component according to your requirement and situation like RAM, hard drive, keyboard, or any component.

Detach the component

After finding the component you want to remove or replace, you need to detach the component from the place where it is connected. It can require you to use the plastic opening tool.

Replace

When you detach the old component then you need to fix the new component and secure it by fixing the screws. Ensure that you correctly connect the new component.

Reconnect the parts of the laptop

Once you replace the component, you need to carefully reconnect all the components and parts of the laptop that you reassemble before. Start by placing the bottom vase and secure every part by correctly fixing the screws.